Facial Skin Rejuvenation Anti-Wrinkle Massage Device

Facial Skin Rejuvenation Anti-Wrinkle Massage Device

Facial Skin Rejuvenation Anti-Wrinkle Massage Device

Prix régulier $ 130.70 USD

Feature:

1. Red Light And Infrared Light: Using a combination of 30pcs 625nm red light and 4pcs 850nm infrared light, it can penetrate deep into the skin, repair damaged skin, and enhance skin elasticity.
2. Anti Wrinkle: The energy provided by LED can activate skin cells, promote cell metabolism, accelerate the repair of damaged skin cells, and promote the production of collagen. Used to improve fine lines, wrinkles, crow's feet, etc.
3. Built-In Smart Skin Sensor: The probe starts automatically when it touches the skin, and stops working immediately after leaving the skin. After a period of inactivity, it will automatically shut down to ensure your safety.
4. Multiple Applicable Area: Red light facial massager is suitable for all skin types and multiple areas, such as the forehead, cheeks, eye area, neck, etc.
5. Serum Lead In: Red light promotes the absorption of mask serum, and firm skin, improves skin dullness, and good skin rejuvenation effect. 50.5℃ warm sense hot compress, safe and does not hurt the skin.


Specification:

 Item Type: Red Light Beauty Machine
Material: ABS
Product Color: Green
Temperature Range: 50.5 ± 2.5℃
Luminous Type and Quantity:
Infrared Light: 30pcs 625nm, Far Infrared Light: 4pcs 850nm
Design Principle: Red light+far infrared+thermal therapy
Use Time: 5-7 minutes per treatment area
Battery Type: Lithium Battery
Battery Capacity: 750mAh (built-in)

Steps for Usage:
Step 1: Wash face and dry. The skin should be clean, dry, and free of any powders, gels, or creams.
Step 2: Press the on/off switch. The device beeps once, and after the indicator light is on for a while, the green indicator light is on. Your machine is ready to use.
Step 3: Place the treatment probe where you want to treat first. The LED light will activate automatically. Press lightly while moving slowly. The surface temperature of the processing probe will slowly increase. If the skin or applicator is too hot, remove the applicator from the skin. 5-7 minutes of treatment on each treatment area.
IMPORTANT: When in contact with skin, keep the device in constant motion! Leaving the device still during treatment can cause redness or minor burns.
Step 4: After treatment is complete, press the on/off switch to turn off the applicator. The device will beep once and the work light on the applicator will turn off.
Step 5: After each treatment, apply a small amount of moisturizing cream to the treated area and massage in light circular motions. Unplug the device from the charging base to clean it. Clean the probe thoroughly with a dry towel, cotton ball, or paper towel. Avoid using a cleaning agent that can damage the paint. Only the glass probe of the device is suitable for direct contact with creams and/or serums.
Step 6: The glass probe must be cleaned after each use. After each application, you may notice a slight redness (mild erythema) of the skin in the treated area. This is normal and should subside within 24-48 hours. Discontinue use if you experience any discomfort or skin redness that persists for more than 48 hours.

Use time: First use: For the first month (4 weeks), use at least 3 times a week, 20-28 minutes each time (5-7 minutes per treatment area).

 Package List:

1 x Host

1 x Manual

1 x USB Cable

1 x Base

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
Our Guarantee
Our Guarantee
Our Guarantee
Our Guarantee